Most of the Accesories listed below will function with both the System 6 and CBI System modules. If you have any questions about the suitability of an accessory, please call, e-mail or contact us through the information request page of this Web Site.
Part No. Item
Figure O Accessory Cable
2 meter shielded cable suitable for use with
Doppler Probes and Sonomicrometer Transducers
(2 required).
801228 126-Series Connector
Used for 201 Sonomicrometer Module(2
per module), 202 Doppler Flow and Displacement
203 Modules (1 per module).
200-380 Phone to BNC Cable (2 Meter)
Allows connection of analog output from
System 6, Twin Pack or any Model 100 Stand
-Alone Units to CA Recorder or strip chart
recorder.
200-387 SVT² Small ARTT Accessory Cable - Konigsberg
Connects the 257 Small Vessel Transit Time
to any of the 367 Series probes which have
Konigsberg connectors. The cable is two
meters in length.
200-388 SVT² Small ARTT Accessory Cable - Triton
Connects the 257 Small Vessel Transit Time to
367 Sseries probes which have Triton connectors.
The cable is two meters in length.
200-397 ART² Large ARTT Accessory Cable - Konigsberg
Connects the 206 Active Redirection Transit Time
Module to Series 306 probes with a Konigsberg
connector. Panel connector is a 3-pin Fischer.
The cable is two meters in length.
200-398 ART² Large ARTT Accessory Cable - Triton
Connects the 206 Active Redirection Transit Time
Module to Series 306 probes with a Triton
connector. Panel connector is a 3-pin Fischer.
The cable is two meters in length.
200-1930-U Unterminated Pressure Accessory Cable
Connects bridge Pressure Transducers to 204 and
205 Pressure Amplifier Modules. Requires user to
solder their own connector to cable. The cable is
three meters in length.
200-1930-K Konigsberg Pressure Transducer Accessory Cable
Connects the 204 and 205 Pressure Amplifier Modules
to pressure transducers. The cable is three
meters in length.
200-1930-M Millar Catheter Accessory Cable
Connects the 204 and 205 Pressure Amplifier Modules
directly to Millar catheters. The Millar adapter
boxes are not required. The cable is three meters
in length.
200-1930-T Extracorporeal Accessory Cable
Connects to the 204 and 205 Pressure Amplifier
Modules directly to the MER100 Disposable Pressuer
Transducers. The cable is three meters in length.
200-1140-XX Sync Chip Sets, Call for others
-06 Biotronix 610
-05 Carolina
-04 Sp-220X
-03 Statham/Gould
-02 Transonic
Copyright 1995 Triton Technology, Inc.
Updated March 28, 2006